Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC [BPR000100400]
Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC [BPR000100400]

Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC [BPR000100400]

TMK-82907

Regular price $69.00 Sale price$58.65 Save 15%
/
Shipping calculated at checkout.

  • Free shipping For Total Value $500.00 & Up |  🎁 Receive in 5 - 7 Days

BatteryProtect BP-100 - 100AMP - 6-35 VDC

Features:

  • The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. 
  • 12/24V auto ranging The BatteryProtect automatically detects system voltage 
  • Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen. 
  • A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. 
  • Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. 
  • Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
  • Ignition proof No relays but MOSFET switches, and therefore no sparks.
  • Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Please contact your dealer for any returns, repairs or support issues related to this product.
Quick Guide (pdf)
Free Shipping for orders $500 & Up

Ship any number of items to any lower 48 states (Continental US) Shipping Charges (Per Session Total Value) may apply :

Rate Name Condition Fee
Alpha

$0.01 To $50

$09.95
Beta

$50.01 To $150

$08.50
Gamma

$150.01 To $300

$06.90
Delta

$300.01 To $499.99

$04.90
Epsilon $500 & Up $0.00

 

 

Shipping Delivery Time:

    • Cutoff Time: 10:00 PM (GMT-05:00) Eastern Standard Time (New York)
    • Handling Time: 02-03 Business Days.
    • Transit Time: 05-07 Business Days.
    • We may use UPS, FedEx, or USPS shipping services.
    • The day of shipment does not count as a transit day Offer is valid in the continental US (lower 48 states) only.
    • The offer does not include 'Alaska' 'Hawaii

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


    Recently viewed